Schedule Setting; Record Timer - SAFE-TECH SVD 14 Manual Del Usario

record 8MB data before an alarm / motion event is triggered.
7) OVERWRITE
Select "ON" to overwrite previous recorded data in your HDD when the HDD is full.
When this function is on and the HDD is full, the DVR will clear 8GB data from the
oldest for continuous recording without notice.
8) EVENT RECORD ALL CHANNEL
Select to record all channels (ON) or record the channel with an event only (OFF)
for any event.
9) KEEP DATA LIMIT (DAYS)
Assign the maximum recording days from 01 to 31 after which all the recorded data
will be removed, or select "OFF" to disable this function.

5.3 Schedule Setting

Right-click to display the main menu, and select "SCHEDULE SETTING".

5.3.1 Record Timer

Click "RECORD". In "RECORD TIMER", select "ON" to enable record timer, and select
the day and time for this function.
RECORD
DETECTION
EXIT
X axis 0 ~ 24 hours. Each time bar is 30 minutes.
Y axis Monday ~ Sunday.
SCHEDULE SETTING
RECORD TIMER
0 2 4 6
SUN
MON
TUE
WED
THU
FRI
SAT
21
FREQUENTLY-USED FUNCTIONS
ON
8 10 12 14 16 18 20 22 24