Coolpad SPLATTER Manual De Instrucciones página 79

carrier for recycling.
2. The battery doesn't need to be empty before recharging, and replace the
battery when it no longer provides acceptable performance. Note: The
battery can be recharged several hundred times.
3. Use only Coolpad-approved chargers specific to your phone model as
they are designed to maximize battery life.
4. Do not disassemble or short-circuit the battery.
5. Keep the battery's metal contacts clean.
6. Recharge the battery after long periods of non-use to maximize battery
life. Note: Battery life will vary due to usage patterns and environmental
conditions.
7. Use of extended backlighting, Browser, and data connectivity kits affect
battery life as well as talk/standby times.
8. The self-protection function of the battery cuts the power of the phone
when its operation is in an abnormal state. In this case, remove the battery
from the phone, reinstall it, and turn the phone on.
Explosion, shock, and fire hazards
1. Do not put your phone in a place that is subject to excessive dust, and
always keep the minimum required distance between the power cord
and heat sources.
2. Unplug the power cord prior to cleaning your phone, and clean the power
plug pin when necessary.
3. When using the power plug, ensure that it's firmly connected.
4. Placing the phone in a pocket or bag without covering the phone
receptacle (power plug pin), metallic articles (e.g.: coins, paperclips,
pens) may short-circuit the phone. Always cover the receptacle when
not in use.
5. Metallic articles that come into contact with the phone may short-circuit
76