Salto RF Node Guia De Instalacion

RF Node
Installation guide
Guía de instalación RF Node
RF Node
Description
The RF Node is part of SALTO´s RF2 system. It works as a bridge, with the Gatewayx2,
between SALTO´s access control software and RF locks.
Descripción
El RF Node forma parte del sistema RF2 de SALTO Systems. Actúa como puente, junto
con el Gatewayx2, entre el software de control de acceso de SALTO y las cerraduras RF.
Electrical characteristic
Características Eléctricas
Operation conditions
Min
Temperature
-20
Humidity
35
Cable requirements
RS485 Connection (AB)
Power Connection (Vdd)
Mechanical Installation
Instalación Mecánica
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
20
83
[25/32"]
[3-1/4"]
Typ Max Unit
25 70 ºC
85 %
Generic twisted pair wire
Note 1
24 AWG
© 2012 SALTO Syst ems S.L.
SALTO´s Software
*RS485 Bus
*Power Supply
UTP CAT5e
Gatewayx2
RF Node
RF Link
Up to 10/15m
to Node
Power
RS485 bus to Nodes
RF Characteristics
Frequency Range
2405-2480 Mhz
Standard
IEEE 802.15.4
Indoor Radio Range
10/15m
Power Supply
Min Typ
Imput Voltage
7 12
Current consumption
Note 1: 1x2x24AWG or UTP CAT5e recommended
Note 2: Power supply must be calculated taking into account Gatewayx2 and
Nodes current consumption
1/3
*RS485 Bus
*Power Supply
UTP CAT5e
Up to 6 External RF Node
RF Node
per Gatewayx2
Up to 112 SALTO RF Lock per
Gatewayx2 (16 per RF Node)
Max Unit
28 V
45 mA
Note 2
221136 -ED0 - 10/09/ 2012