DAY Useful Everyday 72543 Manual De Instrucciones página 48

Temperature Detection and temperature
trend
• The current indoor temperature and the
temperature trend (indoors) are shown in
the LCD display.
• After successfully connecting with
the remote sensor, the main unit can
display the remote temperature and the
temperature trend (remote)
• You may see the following displays:
Arrow up : The temperature/humidity is
rising.
Arrow down : The temperature/
humidity is falling.
No display: The temperature/humidity is
remaining constant.
• Indoor temperature measuring range:
0°C (+32°F) ~ +50°C (+122°F), LL.L °C(°F)
will displayed if value lower than 0C
(+32°F), HH.H °C(°F) will displayed if value
higher than +50°C (+122°F).
• Outdoor temperature measuring range:
40°C (-40°F) ~ +70°C (+158°F), LL.L °C(°F)
will displayed if value lower than -40°C
(-40°F), HH.H °C(°F) will displayed if value
higher than +70°C (+158°F).
48
Rainfall Readings
• Press the "RAIN/ALERT" button to view
different rain readings, users can choose
to view the value of rainfall over time,
by pressing the "RAIN/ALERT" button,
you can view the rain data for "NOW"
"1 HOUR" "24 HOURS" "TODAY" "7 DAYS"
"MONTH" "YEAR" and "TOTAL".
• NOW: Rain from the start of a rain event,
until no rain has accumulated for 30
minutes, resets to zero after 30 minutes
of no additional rainfall.
• 1 HOUR: Rainfall that has accumulated
during the past hour (Example: current
time is7:31, 1HR rain is accumulated total
between 6:32 to 7:31.)
• 24 HOURS: Rainfall based on past 24
hours of time. At each full hour, 1 hour
is recorded, which is the sum of the
accumulated value of 24 hours.
• TODAY: The accumulated rainfall value of
today's day is accumulated from 0:00 to
23:59, and is reset again after 0:00.
• 7 DAYS: Rainfall of last 7 consecutive
24HR rain readings, updates each day
at 0:00, not a subject to the calendar, be
sure time is set.
• MONTH: Rainfall this month (Ex: 1-31
January), reset data on the � rst day of
each month.
• YEAR: Rainfall this year, current year
starting 1 January.
• TOTAL: The amount of rainfall
accumulated from the power or reset of
the main unit.
• Press the "HIST/UP" and "DOWN" buttons
simultaneously for 3 seconds to reset the
rain reading.
Note:
This will not affect the 12 month history
readings which are stored in memory.