Dehumidifier Use; Setting The Controls - Hisense DH-35K1SJE5 Guía De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Control Panel
WATER FULL
AUTO
AUTO
HIGH
CONTINUOUS
LOW
NORMAL
POWER
FAN
MODE
NOTES:
The control panel of your model may differ from the one shown above.
Starting/Stopping the Dehumidifier
NOTES:
Before turning on the dehumidifier, be sure that the bucket
is empty and fits all the way into the dehumidifier.
Each time you unplug the dehumidifier or power is interrupted,
the controls will return to the previous settings when power is
restored.
Minimum operating temperature is 38
Humidity displayed is between
90% Relative Humidity.
Humidity can be adjusted between
80% Relative Humidity.
Electric Shock Hazard
Plug into a grounded three-prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire or electric shock.

DEHUMIDIFIER USE

TIMER
FILTER MONITOR
ºF
(3
ºC)
30% Relative Humidity
30% Relative Humidity
WARNING

Setting the Controls

1. Plug into a grounded three-prong outlet.
2. Press POWER to turn on the dehumidifier.
3. Press FAN to choose the fan speed.
4. Press MODE to choose the mode.
5. Press the plus or minus arrow button to choose the level
of humidity.
6. Press POWER to turn off the dehumidifier.
NOTE: The dehumidifier will retain your last settings.
WATER FULL Light
If this light is on, the dehumidifier is not running. This light
light indicates that you need to check:
If the bucket is full, empty and reinstall bucket.
If the bucket is not in position, remove the bucket and
reinstall it. Make sure the bucket fits all the way into the
dehumidifier and the light is off, or dehumidifier and the
the heat modes will not run.
Fan Speed
and
1. Press FAN to select fan speed.
and
2. Choose Low, High or Auto.
Low Will reach the desired humidity setting slower with
lower sound level.
High—Will reach the desired humidity setting faster.
Auto Will provide the maximum humidity control by automatically
adjusting the fan speed.
5

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido