FRONT PANEL
1
2
1. POWER SWITCH It allows to power on/off the device.
2. USB/SD PORTS They allow to connect an external device with audio files
3. DISPLAY/PLAYER INTERFACE Select the different modes (USB/SD-BT), files, repeat state, etc
4. ZONE OUTPUT VOLUME It is possible to select the output volume on each zone (5 positions+off)
5. POWER LED / VUMETER This LED lits when the unit is connected to main supply and the switch on.
6. BASS LEVEL This potentiometer allows to control the low frequencies gain
7. TREBLE
LEVEL This potentiometer allows to control the low frequencies gain
8. AUX LEVEL This potentiometer allows to control the AUX input
9. MP3 LEVEL This potentiometer allows to control the AUSB/SD/BT input
10. MIC 2 LEVEL This potentiometer allows to control the MIC 2 input
11. MIC 1 LEVEL This potentiometer allows to control the MIC 1 input
12. MIC 1 INPUT Allows to connect a dynamic microphone (Jack 1/4"). This input has PRIORITY
REAR PANEL
14 15
13
5
3
Also, it is possible to check the input gain and clip state.
AML Series
6
4
7
16
- 2 -
9
10
11
8
17
18
User Manual / Manual de uso
EN
12
19