XtremeMac BACKTRACK Guia Del Usuario página 9

Installing the BackTrack App
On your Apple device, go to the App Store and
download the free app, BackTrack App.
NOTE: This device can be used with the iPad (3rd
Generation and newer) and the iPhone (4s and newer).
Pairing the BackTrack to the Apple Device
1. Turn on Bluetooth on your Apple device and turn
the BackTrack on as previously described.
2. Press and hold the Bluetooth button w on the
side of the unit for approximately two seconds;
the unit will beep and the LED will blink.
3. Within five minutes, open the BackTrack App
and the app will ask if you want to add the
device. When paired successfully, the BackTrack
will beep twice.
NOTES:
• If the unit is not paired within five minutes, the
LED will stop blinking.
• The BackTrack will remember the Apple device
that it is paired with, and link to it each time the
BackTrack is powered on.
• If you look on the Setting screen, this unit will be
named "Peripheral."
Using the BackTrack
1. Turn on the unit as shown previously and make
sure any BackTrack device used is paired with
the Apple Device as previously described.
2. Connect up to seven
BackTrack devices on
items like backpacks,
keys, pets collars, etc.
3. Start the BackTrack App
on the Apple Device; the
Apple Device will show
Searching until a paired
BackTrack is located
within 40 feet of the Apple
Device.
Imation Confidential - Use Only By Permission
Controlled material extracted from Matrix on Aug 29, 2012
05:00:45 PM CDT [Bundled with Packaging Configuration 99-
0000-2257-6 A]
9