Installation Procedure; Installing The Appliance - Gaggenau DV 461 710 Instrucciones De Instalación

Cajón de sellado al vacío
Ocultar thumbs Ver también para DV 461 710:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

en-us

Installation Procedure

Installation Procedure
I nstalling the appliance
I n s t a l l a t i o n P r o c e d u r e
9
CAUTION
Tilt protection MUST be installed, otherwise the
appliance will tip when the drawer is open. Only
open the drawer if the tilt protection is installed.
8
Procedure
1.
Install the tilt protection (2a - 2d).
Note: The height of the tilt protection can be adjusted
to make it easier to slide the appliance into the
kitchen unit.
2.
Connect the appliance.
3.
Slide the appliance into the unit (3a).
Note: Make sure that the power cable is not pinched,
trapped or kinked.
4.
Center the appliance (3b).
5.
Carefully open the drawer. Check whether the
appliance is properly protected against tilting (3c).
6.
Screw the appliance into place (3d).

Publicidad

Tabla de contenido
loading

Tabla de contenido