Numark DMC2 Inicio Rápido página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

CUE LE DMC2 CONTROL MAPPING
In this section, we have provided information on using the
DMC2 Software Controller with the Numark CUE LE DJ
Software, included with the DMC2. Once you have plugged in
the DMC2 controller into your computer and installed the CUE
LE software, start up CUE LE.
automatically initialized, you will need to enable it in CUE's
Configuration menu.
1.
Click on the CONFIG button at the top right portion of the
CUE window.
2.
Click on the Remote Control tab to access the list of
compatible remote control devices.
3.
Enable the Numark DMC2 controller by checking the
Enable box. A green dot will appear next to DMC2 to let
you know that the controller is ready to be used.
4.
Click OK. Now the DMC2 controller is ready to control
CUE.
Please refer to the following controller mappings for information on how DMC2's controls are mapped to CUE LE. Please
note that the controls on the left deck are identical to the controls on the right deck. Therefore, we will focus only on the
left deck controls. For additional information on the CUE LE software, please refer to the CUE LE Reference Manual
included on the CD.
1.
PUSH SELECT – You can use this knob to scroll
through the different folders and tracks in CUE's
browser.
When browsing folders in CUE's browser
windown on the left, press down on the knob to expand
a selected folder. If browsing music inside a folder,
press down on the knob to load the selected track to
the corresponding deck.
2.
FOLDER – Allows the PUSH SELECT knob to scroll
through the folders on your hard drive, which will
appear in CUE's browser window on the left. While
using the PUSH SELECT knob to browse your music in
the folder structure, you can press the button to enter
the folder and browse the files inside.
3.
FILE –Allows the PUSH SELECT knob to be used to
scroll and select tracks in the selected folder.
If the controller is not
3
4.
DISPLAY – Shows track name, time, playing
status, BPM and pitch of the song loaded on the
corresponding deck.
5.
TIME – Changes display to show elapsed or
remaining time.
6.
SAMPLER/EFFECT MODE – Changes the function
of the PUSH SELECT knob into an effect and
sample playback function. Results will show in the
display and can be activated via pressing the
PUSH SELECT knob. When in FX mode, turn the
PUSH SELECT knob to scroll through the different
effects.
You can engage and disengage the
selected effect by pushing down on the knob,
When in SAMPLER mode, turn the PUSH SELECT
knob to scroll through the available samples. You
can engage and disengage playback of the
selected sample by pushing down on the knob.

Publicidad

Tabla de contenido
loading

Tabla de contenido