Troubleshooting; Technical Data - Cramer 2300286 Manual De Instrucciones

Troubleshooting

EN
PROBABLE
PROBLEM
CAUSE
The motor shuts Battery is not
down whilst inserted or
working. is inserted
incorrectly.
The machine is
damaged.
With the safety The machine is
lock button and damaged.
trigger on, the
cutting means
does not turn.
The cutting means Insufficient
overheats whilst blade
working. lubrication.
Excessive noise Loose or
and/or vibration is damaged parts.
experienced whilst
working.
The machine gives The machine is
off smoke whilst damaged.
working.
8
cramer.eu
POSSIBLE SOLUTION
Make sure that the battery is inserted
correctly.
Do not use the machine Remove the
battery and contact a Service Centre.
Do not use the machine. Immediately turn
off the machine remove the battery and
Contact a Service Centre.
Turn off the machine, wait until the cutting
means is stationary, remove the battery
and lubricate the blades.
Turn off the machine, remove the battery
and:
– inspect for damage;
– check for and tighten any loose parts;
– have any damaged parts replaced or
repaired with parts having equivalent
specifications.
Do not use the machine. Immediately turn
off the machine remove the battery and
Contact a Authorised Service Centre.

Technical Data

PROPERTY
Model 82PHT
Voltage 82V
2800/3200/3600/4000
No load speed
(±10%) min
Blade length 500 mm
Blade opening 30 mm
Measuered sound
85 dB (A), k=3.0
pressure level
Guaranteed sound power
101 dB (A)
level
Vibration level 4.1 m/s², k=1.5 m/s²
Weight without battery
6.6 kg
pack
82V220G/ 82V430G/
Battery pack
82V220/ 82V430
Battery charger 82C1G/ 82C2/ 82C6
VALUE
82PHA
82V
2800/3200/3600/4000
(±10%) min
-1 -1
500 mm
30 mm
85 dB (A), k=3.0
101 dB (A)
4.1 m/s², k=1.5 m/s²
5.3 kg
82V220G/ 82V430G/
82V220/ 82V430
82C1G/ 82C2/ 82C6