Descargar Imprimir esta página
Velleman VCC PCI 4 Guia De Inicio Rapido
Velleman VCC PCI 4 Guia De Inicio Rapido

Velleman VCC PCI 4 Guia De Inicio Rapido

– carte vidéo pour 4 caméras

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Enlaces rápidos

VCC – VIDEO CAPTURE CARD FOR 4 CAMERAS
1. Introduction
Thank you for buying the VCC PCI 4 port video capture card! Please read the manual thoroughly before bringing this device
into service. Make sure that the device was not damaged in transit. If the device is damaged, you should contact your dealer.
Verify if all parts are included: a VCC video capture card, a driver CD and this user manual.
2. Specifications
Chipset
Bus interface
Video inputs
Video format
Software required
System requirement
3. Installation
a. Before Installation
Hardware: as the VCC is a PCI video capture card, make sure there is a PCI slot available in your PC.
Software: make sure Microsoft™ DirectX8.0 or higher is installed in Win98/ME/2K/XP.
On the component side of the card, the jumper
on connector J3 determines what input channel
is sent out through the output connector:
b. Installing the video capture card
1. Power off your PC, disconnect the power cord and open the housing.
2. Insert the video card into the available PCI slot and fasten the attachment screws.
3. Close the housing, reconnect the power cord and power on your PC.
c. Installing the PV143 driver under Win98/ME/2K/XP
NOTE: before installing the PV143 driver, check if you have the BT878 driver installed. If so, please uninstall the
BT878 driver completely to avoid compatibility problems with the PV143 driver.
1. Insert the CD into the CDROM drive (here we assume this is the E drive)
2. New hardware (the video card) will be detected and an "add new hardware wizard" dialogue box will appear.
3. Click next and select the driver source as E:\PV143\XXX\Driver\Win98/ME/2K/XP (XXX refers to the subfolder -
which one depends on the resolution you want: folder "320" for 320x240 or "640" for 640x480).
4. The BT878 video/audio drivers will automatically be installed in your system
5. After successfully installing the drivers, you can find them in your system properties, on the 'Device Manager' tab,
under "Sound, video and game controllers".
VCC
Conexant (BrookTree) Bt878/878A
PCI v2.1 compliant
4 RCA jacks
NTSC/PAL/SECAM
Win 98/ME/2K/XP OS, Microsoft™ DirectX8.0
IBM 32bit compatible PC
128MB RAM
2x CDROM drive
PCI/AGP card and monitor
TO TV SET
SOURCE_1
SOURCE_2
SOURCE_3
SOURCE_4
1
J3
1-2 (DEFAULT)
3-4
5-6
7-8
VELLEMAN

Publicidad

loading

Resumen de contenidos para Velleman VCC PCI 4

  • Página 1 1. Introduction Thank you for buying the VCC PCI 4 port video capture card! Please read the manual thoroughly before bringing this device into service. Make sure that the device was not damaged in transit. If the device is damaged, you should contact your dealer.
  • Página 2 DirectX8.0 or higher on your PC, restart your PC and try again. • Do not attempt to install 2 (or more) VCC cards on the same system ; it will cause VCC installation failures. The information in this manual is subject to change without prior notice. VELLEMAN...
  • Página 3 - u kunt deze zelf bepalen volgens de gewenste resolutie: "320" voor 320x240 of "640" voor 640x480) 4. De BT878 video/audiodrivers zullen automatisch in uw systeem geïnstalleerd worden. 5. Nadat de drivers geïnstalleerd zijn, kunt u deze terugvinden in uw systeemeigenschappen, onder 'Device Manager' en 'Sound, video and game controllers'. VELLEMAN...
  • Página 4 Microsoft™ DirectX8.0 of hoger op uw PC, herstart uw PC en probeer opnieuw de applicatie te openen. • Probeer niet 2 (of meer) VCC-kaarten op hetzelfde systeem te installeren ; dit zal installatiefouten veroorzaken. De informatie in deze handleiding kan te allen tijde worden gewijzigd zonder voorafgaande kennisgeving. VELLEMAN...
  • Página 5 '320' pour 320x240 ou "640" pour 640x480). 4. Les pilotes BT878 seront automatiquement installés dans votre système. 5. Après l'installation des pilotes, vous pouvez les retrouver dans les 'system properties', sous 'Device Manager' et "Sound, video and game controllers". VELLEMAN...
  • Página 6 Microsoft™ DirectX8.0 ou meilleur sur votre ordinateur, redémarrez-le et essayer d'ouvrir l'application encore une fois. • N'essayez pas d'installer 2 (ou plus) cartes VCC sur le même système ; ceci causera des fautes d'installation. Toutes les informations présentées dans ce manuel peuvent être modifiées sans notification préalable. VELLEMAN...
  • Página 7: Vcc - Tarjeta De Vídeo Para 4 Cámaras

    Ud. selecciona según la resolución deseada: '320' para 320x240 o "640" para 640x480). 4. Los driver BT878 se instalan automáticamente. 5. Después de la instalación de los driver, puede encontrarlos en 'system properties', bajo 'Device Manager' y "Sound, video and game controllers". VELLEMAN...
  • Página 8: Operación

    DirectX8.0 o más en su ordenador, vuelva a activarlo y vuelva a intentar de abrir la aplicación. • No intente instalar 2 (o más) tarjetas VCC en el mismo sistema ; esto causará errores de instalación. Se pueden modificar las especificaciones y el contenido de este manual sin previo aviso. VELLEMAN...
  • Página 9 VCC – VIDEO-CAPTURE-KARTE FÜR 4 KAMERAS 1. Einführung Danke, dass Sie die VCC PCI 4-Port Video-Capture-Karte gekauft haben! Bitte lesen Sie sorgfältig diese Gebrauchsanweisung, bevor Sie das Gerät benutzen. Bitte prüfen Sie, ob das Gerät während des Transportes nicht beschädigt wurde. Wenn das Gerät beschädigt ist, sollen Sie Ihren Händler kontaktieren. Bitte prüfen Sie auch, ob alle Teile geliefert wurden: eine VCC Video-Capture-Karte, eine Treiber-CD und diese Gebrauchsanweisung.
  • Página 10 Sie Microsoft™ DirectX8.0 oder höher auf Ihrem Computer, schalten Sie Ihren PC erneut ein und versuchen Sie noch einmal. • Versuchen Sie nicht 2 (oder mehrere) VCC-Karten auf einem System zu installieren; es wird VCC Installationsfehler verursachen. Änderungen in Technik und Ausstattung ohne vorherige Ankündigung vorbehalten. VELLEMAN...