Bien Air OPTIMA Guia Del Usuario página 39

OPTIMA INT
List of errors & troubleshooting
Communication timeout.
Message Error(s): #3 comm. timeout
Root cause Communication failed with the DMCX/DMX2/DMX3 board.
Action Check DMCX/DMX2/DMX3 connection (red 8-pin connector).
Contact retailer.
DMCX/DMX2/DMX3 board over-temperature.
Message Error(s): #4 temperature
Root cause DMCX/DMX2/DMX3 board too hot (electronic device overheating).
Action Wait until the DMCX/DMX2/DMX3 cools down.
Contact retailer.
DMCX/DMX2/DMX3 board under-voltage.
Message Error(s): #5 under voltage
Root cause DMCX/DMX2/DMX3 board 32V power supply detected voltage too low.
Action Contact retailer.
DMCX/DMX2/DMX3 board over-voltage.
Message Error(s): #6 over voltage
Root cause DMCX/DMX2/DMX3 board 32V power supply detected voltage too high.
Action Contact retailer.
DMCX/DMX2/DMX3 unknown failure.
Message Error(s): #0 unknown
Root cause DMCX/DMX2/DMX3 unknown failure (unidentified cause).
Action Contact Bien-Air Dental SA.
37