Master Audio
3.2. Full range cabinet + subwoofer use
The LNC-12W , LNC-15W and LNC-18W are equipped with a M20 Plate for a 35mm
distance rod. We can use it to place over the subwoofer the models that are equipped
with the tripod socket. Be careful not to use this system on non-flat surfaces as it may
become unstable.
Fig.6. Full range cabinet with subwoofer
3.3. Live applications (mobile)
For a mobile application, whether it is an outdoor or indoor installation, the common
location is to place the bass units (one or two per channel) on each side of the stage.
Fig.7. Mobile applications
To obtain a clear and free-distortion reproduction, it is advisable to place the mid-high
units on top of the low units keeping between them an approximate height of two
meters. If such height cannot be achieved nor maintained, it is advisable to use the
classical tripod for each mid-high cabinet and leave the low units on the floor.
WARNING!!! For installations that suffer from acoustic problems and in which it is
necessary to reinforce the response in the low frequencies, it is advisable to group all
the subwoofers together in the same point. By this way, cancellations will be avoided
and a higher acoustic pressure level will be obtained.
LNC Series. Version 1.1
Abr 11
14