Daytona HELMETS A2 Manual De Instrucciones página 6

an incoming call: press the control button (1B or
6A) twice, as soon as you hear the acoustic
signal for an incoming call Redialling : press the
control button (1B or 6A) twice. This depends
on the features and configuration of your mobile
phone.
Adjusting the volume
The DAYTONA A-2 device is pre-programmed
with a volume level that allows for optimal
listening at speeds of up to 80 km/h (50 mph). To
adjust the volume, use the volume control on the
connected device. DAYTONA A-2 bluetooth is
pre-programmed for 3 different levels of
volume. pressing the button 6B will change the
volume to the next level automatically. Volume
perception may vary depending on the position
and separation of the speakers from your ears,
as well as the type of helmet and motorcycle,
external conditions and other factors.
Technical Specifications
Bluetooth : 2.1 Class 2
Profiles : A2DP, HSP, HFP, EDR
Battery : Lithium polymer, allowing for up to 7
hours of talk time and 200 hours of standby time
(depending on use and configuration of the
device)
Care and maintenance
The DAYTONA A-2 device uses components
with the latest technology and is manufactured
to high standards. To keep your device from
inadvertently becoming damaged, please read
the following recommendations carefully :
• Do not attempt to open any of the system
components, since the electronic parts inside it
may become damaged. Do not attempt to open
or change the battery as it may be dangerous.
• Keep the DAYTONA A-2 out of the reach of
children.
• Keep the DAYTONA A-2 in a dry place.
Humidity and condensation may damage the
electronic circuits.
• Avoid exposing the device to extreme
temperatures.
condensation inside the components as these
warm up. Extreme heat may damage the
battery, circuits or casings.
• Do not drop, hit or bend the components as the
internal circuits may become damaged.
• Do not paint or decorate the DAYTONA A-2 as
the casings may become damaged or impede
correct operation.
• Do not use chemical products, solvents or
detergents to clean the DAYTONA A-2 as these
may damage the device.
Troubleshooting
If you cannot connect your DAYTONA A-2
device to your mobile phone :
• Make sure the DAYTONA A-2 is switched on
• Make sure your mobile phone is switched on
and Bluetooth has been turned on
• Make sure both devices are paired
• Make sure the DAYTONA A-2 device and your
mobile phone are not more than 10 metres (32
ft.) apart If, after this, you're still not able to pair
or use the DAYTONA A-2 with your mobile
phone, please contact the retailer where you
purchased the product.
Shortcuts
The DAYTONA A-2 device allows you to receive
calls automatically (as long as this feature is
supported by your mobile phone). To do this,
6
Intense cold may create