Remote Control; Programming Mode - nexel 242945 Manual De Instrucciones

INSTALLATION
1. Remove all packing material and accessories.
2. Examine the oven for any damage such as dents or
broken door. Do not install if oven is damaged.
3. Remove any protective film found on the microwave
oven cabinet surface. Do not remove the white cover
that is attached to the oven cavity to protect the
magnetron. Do not remove the legs from the bottom of
the oven.
4. Place the oven as far as possible from radios or TVs.
5. Ensure the unit is on a level surface. Do not install over
a cooktop or other heat-producing appliance.
6. Do not block the intake and outlet openings. Keep the
following clearance:
3.0 Inch
(7.5cm)
3.0 Inch
(7.5cm)
7. Plug the unit into a 120V 60Hz power outlet.
OPERATION INSTRUCTIONS
Turning the oven on:
• "-- --" displays when the oven is plugged in the first time.
Open the door and close, the LED displays 00:00. The
microwave is now ready to use. This is the Ready Mode.
Time Entry:
• The user may manually enter a cook time and
power level.
• Input desired cooking time using number keypad.
• Press Defrost, Medium or Medium Hi key to determine
power level. LED will display the selection. If the same
key is pressed twice, the power will change to PL10
(Power Level 10 or full power). If no power is selected,
PL10 is the default.
• Press Start Button to begin cooking. Cooking time will
display on LED.

PROGRAMMING MODE

1. This mode allows the user to assign cooking times
and power levels to the keypad number keys.
2. Open the door, press and hold Number Key 1 for 5
seconds. The buzzer will sound once. Programming
Mode is activated.
3. LED displays "ProG". Programming setting is now
ready to be entered.
4. Select desired programming location using number
keypad 1-10.
5. Press the Time Entry key. LED will display the saved
time. Input cooking time using number keypad.
Microwave Oven
12 Inch
(30cm)
Open

REMOTE CONTROL

1
2
3
4
5
1. Power level buttons
2. Time cook button
3. X2 button
4. Stop/cancel button
5. Start button
6. Number Keypad
6. Select desired power level. LED will display the
selected power. If no power level is selected, the
maximum power level of 100% is the default.
7. After setting the time and power, press the start key
to save the program. LED will display "Prog".
8. Close the door and the oven will return to Ready Mode.
Note: Pressing X2 button will double the cooking time
during Programming Mode. Press the Stop Button during
any mode to pause. Pressing twice will cancel the mode
and return to "Ready Mode".
Example: For a cook time of 1 minute and 15
seconds at 50% power using the number 4 key.
1. Open oven door and press Number Key 1 for 5
seconds. LED displays ProG.
2. Press Number Key 4. The program will be saved in "4".
3. Press the Time Entry Key. LED displays 0:00
4. Press Number Keys 1, 1 and 5 to input the cooking
time. LED displays 1:15.
5. Press the Medium 50% Key to input 50% power
level. LED displays PL5.
6. Press the Start Key to save.
7. Close oven door.
To use this program press"4". The oven will operate for
1:15 at 50% power.
3
Instruction Manual
6