Receiver Menu - Marantz professional PMD-750 Guia Del Usuario

Operation
To set up and use your PMD-750, follow the steps in the
Receiver chapter in order. If you are setting up a system using two transmitters, set up
each transmitter one at a time, and keep each transmitter powered on as you set up the
additional unit.

Receiver Menu

Receiver battery and
output meter/level
setting
Receiver/Pairing
Pairing Mode:
•
Press the navigation buttons to move the cursor to the RX icon. Once RX
is highlighted, the icon will display PAIR. Press Enter to go into pairing
mode and the icon will flash to wait for TX1 or TX2 pairing. Once paired, the
icon will be lit solid.
Output Level:
•
Press and release the Enter button on the receiver to highlight the meter
and use the navigation buttons to adjust the receiver output level.
Output (this function is only available when 2 transmitters are paired):
•
Press and release the Enter button on the receiver to toggle between mono
and stereo modes. The receiver will output in mono if only one transmitter is
paired.
Transmitter
battery and signal
indicator
Transmitter
1 or 2
Pairing the Transmitter and
Transmitter 1
Transmitter 2
(if two are paired)
Mono or Stereo
output from
receiver
9