Emptying The Tank - Promac VAC-20PC Manual De Usuario

! DANGER - This equipment incorporates parts such as switches, motors or the like that tend to
produce arcs or sparks that can cause an explosion. Do not pick up flammable, combustible, or
hot materials. Do not use around explosive liquids or vapors, as electrical devices produce arcs or
sparks which can cause a fire or explosion - do not use at filling stations or anywhere gasoline is
stored or dispensed.
This vacuum cleaner has a built in thermal overload protector to protect the motor from high
temperatures. This can occur under heavy use. If the motor temperature shuts off during
operation, turn the switch off and allow the motor to cool for 5 minutes. Turn switch on and
resume operation.

4.7 EMPTYING THE TANK

FOR LIQUID
To empty the tank for liquid
unscrew the drain plug (A) and
remove it.
FIG. 13
9
Discharge water from filter.
4.8 EMPTYING THE TANK FOR DUST/DEBRIS
To empty the tank for dust/debris take off the head (see
chapter 3.1). If using a dust bag remove the dust bag and
insert a new.
Machines with 20l and 30l plastic tanks are equipped with a
handle (A) that can be using during disposal of the
dust/debris.
FIG. 12
ENGLISH