Features; Front Panel - Dynex DX-CDRW52 Guia Del Usuario

DX-CDRW52.fm Page 4 Friday, April 1, 2005 4:16 PM
4

Features

Front panel

Disc tray
Using force to pull out or push in the disc tray can damage the drive.
Name
Disc tray This tray is for loading the CD. It accepts 120 mm (standard) and 80 mm (mini) discs.
Place the CD in the center of the tray.
Indicator When a CD has been ejected or is being saved, the indicator light turns on. When a CD
is being written, or a CD can't be saved, the indicator light turns off. When a CD is
unreadable or the drive is malfunctioning, the indicator light flashes.
Manual eject hole
Eject button Opens and closes the disc tray.
Indicator
Manual eject hole
Features
When the power has been interrupted or it is impossible to eject a disc,
insert a straightened paper clip or pin into the manual eject hole to eject the
disc. The manual eject hole is only for emergency use. Mechanical damage
could result if you routinely use this.
Features
Eject button