Configuration - SOMFY Animeo IB Guia De Instalacion

EN
Before installation, please read and follow these instructions. An incorrect installation could lead to serious injury.
The product must be installed by a qualified electrician. SOMFY's liability for defects and damages is excluded if they
were caused by disregard of the instructions. Keep these instructions for future reference.
A
PICTURES
[1] animeo IB/IB+ Repeater WM 220-230 V AC (Ref. 9011809).
B
MOUNTING
Choose the optimal location: flat and large surface
[1] Installation and distance measures
[2] Drill measure
[3] Mounting of housing
C
WIRING
[1] Keep to minimum distance
[2] Tool for all terminals
[3] Mount strain relief
[4] Check the correct running direction of the end products (group and local control inputs).
UP: end product moves upward (C + )
STOP: end product stops (C +
DOWN: end product moves downward (C +
[5] Wiring diagram IB mode
[6] Wiring diagram IB+ mode
D

CONFIGURATION

[1] Mode IB+ active
IB+ signals (C, ,
[2] Mode IB active
Only IB signals (C,
+ )
)
and ) will be amplified.
, ) will be amplified.
11/32
animeo IB/IB+ Repeater . REF. 5011853 C -