Key Lock; Touch Control Safety Functions; Sensor Safety Cut Off - SUNFEEL PLV4FBT Instrucciones De Instalación Y Funcionamiento

Key Lock

Key lock functionality is for blocking
and set the appliance into a save
modus during
modifications as for example rise
heat settings and others should not
be possible. It is only possible to
switch the appliance off.
The lock function is active, if the
Key Lock button
least 2 sec.
acknowledged by a
successful operation of more than 2
sec, the key lock indicator flashes and
the heater is locked.
The heater can only be locked in oper-
ating mode (B mode).
If the heater is locked, only can be
operated; all
blocked. If any
operated in the blocked mode, the
buzzer signal sounds and the key lock
indicator flashes as indication that the
key lock functionality
activated. Only
operation of
switched off the appliance, you can not
restart it again without first unlocking it.
The key lock indicator will go out after
pressing for 2 sec. Now the hob
control is unlocked and can be operated
in normal order.
operation. Touch
is pressed at
This operation
buzzer.
other buttons
other button
has
the switch off
is possible. But if you
TOUCH CONTROL SAFETY
FUNCTIONS
The following safety functions are avail-
able to avoid unintentionally operating
the hob control.

Sensor Safety Cut Off

, Sensor monitoring is included to pre-
vent the appliance from unwanted, ran-
dom sensor operation.
is
If one or more buttons are pressed
After
longer than 12 sec, the sensor monitor-
ing routine acoustically indicates that
wrong operation (pot or other object
placed on the button, sensor failure,
etc.) and switches off the appliance.
are
is
been
by
EN -12-