PEERLESS Mounts PRG-UNV Instalación Y Ensamblaje página 4

Installation to Extension Column / Ceiling Plate
NOTE: Refer to accompanying instructions with ceiling plates (sold separately) for installing
1
these models to ceiling.
Screw projector mount assembly (A) onto extension column as shown in figure 1.1.
Tighten swivel stop screw against extension column, flush mount tube or reducer using 4 mm
security allen wrench (I) as shown in figure 1.2.
NOTE: Swivel stop screw is used to jam against threads of extension column, flush mount tube
or reducer to prevent any excess movement of projector mount assembly (A). Do not overtighten
screw; overtightening screw will damage threads making it difficult to separate products.
Skip to step 5.
A
fig. 1.2
1 1/2" ExTENSION COLUMN
(SOLD SEPARATELy)
UL LISTED ExT OR ADj SERIES)
ARROW INDICATES
FRONT OF MOUNT
fig. 1.1
SWIVEL STOP SCREW
4 of 51
CMj 455
(SOLD SEPARATELy)
ISSUED: 09-30-09 SHEET #: 056-9024-1