Billow MD01V2 Manual Del Usuario página 4

EN
Note: If you do not have a USB port on your TV you must
purchase a USB power adapter and connect the end of the
USB cable.
Using the MD01V2
User Interface
Once turned on, the first screen that displays is:
As we can see the name of a new wireless network and
password appears MD01V2-xxxxxxxx, password: xxxxxxxx.
IOS connection
1. On your phone go to Settings and select the MD01V2-
xxxxxxxx connection to connect, then enter the password
displayed on the screen.
2. Swipe up from the bottom of the screen of your device to
access the Control Center, select your MD01V2-XXXXXXXX.