Publicidad
Idiomas disponibles
Idiomas disponibles
3. Double check pouch's hook-and-loop closure is closed and facing down.
*There is a danger of bodily injury if this device is not donned correctly. Do not wear
this device under clothing.
How To Inflate:
1. Make sure pouch is at the front of waist before inflating.
2. Firmly jerk yellow pull handle down. This will cause the
bladder to inflate and pop out of the pouch.
3. Once inflated, place the webbing strap over your head.
4. For maximum buoyancy, loosen waist belt and slide air
chamber up to the chest. Re-inflate using oral tube until the
bladder is completely filled.
5. This PFD can be inflated before or after entering the water
and can be topped off by using the oral tube.
How To Repack After Inflation:
1. Fully deflate the PFD before re-arming and repacking.
2. Re-arm this inflatable PFD with a 20 gram CO2 cylinder.
CO2 cylinders can only be used one time and must be
replaced after every use.
3. Once re-arming, replace the green indicator pin.
4. Follow the re-packing instructions printed on the back of the bladder.
5. Once the PFD has been folded and repacked, ensure the CO2 cylinder is at the
front of pouch.
6. Ensure pull handle is outside of the pouch and securely close hook-and-loop
fastener on the pouch.
Publicidad
