Maintenance Schedule - Holmatro BMC1 Manual

7 Maintenance
7.1 General
Proper preventive maintenance of the equipment preserves the operational safety and extends the life
of the equipment.
CAUTION
When performing maintenance activities, always comply with the relevant safety regulations.
Wear the prescribed personal protection equipment.
7.2

Maintenance schedule

/i
Mains connector (exterior)
7.3 Maintenance activities
• After every use, check the mains connector for completeness and damage. Do not use the mains
connector if it is damaged; in that case contact the Holmatro dealer.
7.4 Yearly dealer maintenance
We recommend having the equipment inspected, checked, set and tested once a year by a Holmatro
Certified Technician who has the appropriate knowledge and the necessary tools (see also section 1.7).
The Holmatro dealer can organize the yearly maintenance for you on a contract basis.
7.5 Storage
• After every use, store the mains connector in a dry, cool, well-ventilated and dust-free area.
• Strictly observe the maximum storage temperature. See section 3.5. The recommended relative
humidity range is: 0% - 80%.
• Store the mains connector out of reach of children.
8 Decommissioning/Recycling
At the end of its service life the equipment can be scrapped and recycled.
• Make sure that the equipment is put out of order to avoid any use.
• Check that the equipment does not contain any pressurized components.
• Recycle the various materials used in the equipment such as steel, aluminum, NBR (Nitrile
Butadiene Rubber) and plastic.
BMC1 / BMC2
Check
916.001.297_002
Time interval
x
EN
27