All manuals and user guides at all-guides.com
User's manual
To operate, simply aim the infrared remote control at the LED
indicator side of the transmitter unit, and then invoke the
function. The LED indicator of the transmitter unit will flash during
signal transmission. The receiver unit will receive and send out
the transmitted signal to your A/V equipment.
Precautions
- Do not use oil, solvents, petrol, paint thinners or insecticides on
the product.
- Keep this product away from any strong light.
- This product contain no user serviceable parts inside. Never
disassemble as this may result in electric shock.
- Do not use this product near water, for example: bath tud,
kitchen sink, laundry tub, wet basement, or swimming pool.
- Use this product on a flat surface free from vibration.
- This product should be powered from the type of source
indicated on the rating level.
- Do not touch the antenna when the Transmitter and/or Receiver
unit is in use. Otherwise, the performance is affected.
- Remove the AC power plug from the wall socket under the
following conditions:
a) Whenever the plug is damaged.
b) The product has been exposeed to water.
c) If the product does not operate normally.
d) If the product has been broken.
- The power adaptor is the switch off device of the equipment.
The mains socket that is going to be used to connect the
equipment should be located nearby and should be easily
accessible.
10
RC Extender