ForaCare TN'G BP Manual Del Propietário página 20

Average Measurement
This function automatically performs three (3) consecutive blood
pressure measurements and displays the average result in the end. This
function is only available when your meter is connected to your mobile
device.
1. Press the Bluetooth button. The "PCL" icon will appear on the meter
display, indicating that the device is ready to transmit data.
2. Launch iFORA BP App.
4. After the first measurement is complete, the device and iFORA BP app
will start counting down before the second measurement begins. The
device will take three (3) measurements consecutively with an interval of
20 seconds.
NOTE:
When the difference between the first and second systolic pressure is more than
15 mmHg, the time interval for third measurement will be 40 seconds.
20
3. Enable Average Mode and tap ON/OFF
Button on the iFORA BP screen. Then the
cuff will begin to inflate automatically.