Customizing Drive Icons - Dynex DX-CR501 Guia Del Usuario

Using your card reader
Feature
LED

Customizing drive icons

Note: Connect the card reader to the computer before installing the driver.
To make the media card slots easier to recognize, you can
customize the drive icons.
1 Save all files and close all programs.
2 Insert the included utility CD into your CD drive. The driver
home page pops up automatically.
Description
Indicates when a slot is reading from or
writing to a card.
LED off-Your card reader is not being used.
Power LED on (green)-Your card reader is
powered on.
Data LED on (green)-A card is inserted in the
slot.
LED flashing-Data is being transferred to or
from the memory card and the computer.
7