Publicidad
Idiomas disponibles
Idiomas disponibles
User Manual
Link LED
If the connection between the Parent Unit and Baby Unit is broken at any time the
green "Link" light on the Parent Unit will fl ash and the green. To re−establish the
"Link", please make sure the Parent is in-range with the baby unit.
Volume
You can adjust the volume at which you hear your baby by using the Up/Down
Keys on the side of the Parent Unit. This will not aff ect the sensitivity of your Baby
Monitor, only the volume at which you hear those sounds through the Parent
Unit.
Battery Charge indicator and battery low warning
The Parent Unit battery capacity level is indicated by power LED. If the charge
becomes low, a battery low warning _beep" will sound and the Parent Unit's power
LED will begin to fl ash. If this occurs you should plug in dc power into the Parent
Unit to re−charge the batteries. During charging, the Power / BATT LED will slowly
fl ash by every 5 seconds. You can still use your Parent Unit during charging. After
the battery is fully charged, LED will stop blanking and turn on steadily.
4. Specifi cations
Specifi cations
Power supply (Baby unit)
Power suply (Parent unit)
Battery initial charging time
Range
Frecuency range
5. Declaration of Conformity
Flamagas S.A. hereby certifi es that the model Rimax Baby
MUM RB102 complies with the basic requisites and other
requirements of Directive 1999/5/EC.
A full copy of the statement of compliance can be found at:
www.electronicafl amagas.com
EN
Value
Switching mode adaptor 5 V DC 600 mA
Switching mode adaptor 5 V DC 600 mA o recargable
batteries (2 x AAA) 1.2V NiMH 600 mAh
Mín 8 h
Up to 300 meters under optimum conditions. Range
is reduced in buildings through walls, doors etc.
2,4 GHz
9
Baby MUM RB102
Publicidad
