Publicidad
Idiomas disponibles
Idiomas disponibles
PW-150/250
PW-150/250
V5
V5
AUTOMATIC FEEDBACK CONTROL (AFC)
If acoustic feedback would occur while PTT or INTER are on (caused, for instance, by the
opening of a door or window), the equipment will detect and automatically fi x the issue
by decreasing the volume. After the event takes place, the equipment will attempt to rise
the volume back to the level defi ned by the user, as long as AFC is not triggered again.
ENERGY SAVING FEATURES (Automatic Shut Down, ASD)
Partial Shut Down (PSD)
The equipment constantly tracks the incoming voltage status. If the incoming voltage
drops below 12.6VDC, after 20 seconds of inactivity the equipment activates PSD mode.
This change is indicated by the turning off the keyboard's backlights. While on PSD mode,
upon pressing any key the respective function will execute normally and the equipment
will return to normal energy consumption mode.
Total Shut Down (TSD)
If the incoming voltage drops below 11.5 VDC, after 60 seconds the equipment will
automatically shut down any function and auxiliary load. While on TSD, upon pressing
any key the backlights will blink 3 times and the function controlled by the pressed key
will not execute.
Once the equipment detects that the incoming voltage exceeds 12.5VDC again, the
equipment will return to its normal operation.
HAND MICROPHONE (OPTIONAL)
The microphone has 3 buttons to control public address and siren functions.
PTT
SIREN 2
Siren - HORN tone
ON: press & hold
OFF: release
Activates the
reproduction of the
HORN tone.
Siren - SIREN 2 tone
ON: press & release
OFF: press & release
Activates the
reproduction of the tone
selected for SIREN 2.
HORN
Public address - PTT
ON: press & hold
OFF: release
Allows the driver
to communicate
to the exterior
through the hand
microphone.
8
8
PW-150/250
PW-150/250
V5
V5
Setting up SIREN 2 tone
SIREN 2 function allows to choose among 4 different tones (WAIL, Hi-Lo, PHASER &
YELP). The selection of a SIREN 2 tone is independent from the other sirens, so that
changing tones for SIREN or AUX SIREN will not affect SIREN 2. To set up the SIREN 2 tone,
follow the procedure described below.
1. Press and hold SIREN 2, this will change the tone to the next option.
2. Release SIREN 2 to save the heard confi guration.
DIMENSIONS
INPUT VOLTAGE
INPUT CURRENT
STAND BY CURRENT
AUDIO FREQUENCY
OUTPUT POWER
SIREN FREQUENCY
LOW VOLTAGE SHUTDOWN
BYG Electrónica S.A.S. guarantees that this product leaves the factory free from defects related to materials and
manufacturing. If for any reason a failure related to materials and manufacturing were to occur during the period
of one year after the date of purchase, BYG Electrónica S.A.S. would repair or replace the failing equipment free
of charge.
This warranty shall be voided if the product is modifi ed, tampered with, misused, or subjected to abnormal working
conditions. This warranty does not cover physical damage to the product surface. This warranty does not apply
when the malfunction results from the use of this product in conjunction with accessories, other products, or
peripheral equipment not designed by BYG Electrónica S.A.S.
TECHNICAL SPECIFICATIONS
Electronic Unit
3.7 H x 10.9 W x 19.8 D cm
Loudspeaker
13.3 H x 20.4 W x 15.5 D cm
Keyboard Control
2.5 H x 0.7 W x 5.4 D cm
Internal Speakers
8.0 H x 5.6 W x 9.5 D cm
12 - 14.9 VDC
PW-150: 9.5 Amps @ 13.6 VDC
/ PW-250: 12 Amps @ 13.6 VDC
<25 mA
330Hz - 5600 kHz
PW-150: 142W RMS - 8 Ohm
/ PW-250: 250W RMS - 4 Ohm
440 - 1750 Hz
If voltage drops below 11.5 V for 60 seconds or longer, the equipment will
cease to work and resume operation when the system voltage is above 12.5V
B&G ELECTRONICS
ONE YEAR LIMITED WARRANTY
9
9
1.5''H x 4.3''W x 7.8''D
5.2''H x 8.0''W x 6.1''D
1.0''H x 0.3''W x 2.1''D
3.2''H x 2.2''W x 3.7''D
Publicidad
