Connection Status Led Indicator - Avigilon APD-S1-D Guia De Instalacion

Connection Status LED Indicator

Once connected to the network, the Connection Status LED indicator will display the progress in connecting to
the Network Video Management software.
The following table describes what the LED indicator shows:
Connection Status
Connection State
One short flash every
Obtaining IP Address
second
Two short flashes
Discoverable
every second
Two short flashes
Upgrading Firmware and one long flash
every second
Connected On
Connection Status LED Indicator
LED Indicator
Attempting to obtain an IP address.
Obtained an IP address but is not connected to the
Network Video Management software.
Updating the firmware.
Connected to the Network Video Management software or an
ACC Server. The default setting can be changed to "Off" using the
camera's web user interface. For more information see the Web
Interface User Guide - H4 HD.
Description
14