Haverland GP6 CPL Manual De Instalación Y De Utilización página 23

button
1 st press 10 sec.
Enter
configuration mode
Press a 2nd time
Press a 3 time
rd
Press a 4 th time
Press a 5 th time
Press a 6 th time
Press a 7 th time
Press an 8 th time
Press a 9 th time
Press a 10 th time
Press an 11 th time
Press a 12 th time
Press a 13 th time
Press a 14 th time
Press a 15 th time
Press a 16 th time
Press a 17 th time
Press an 18 th time
Press a 19 time
th
Press a 20 th time
Exit the mode after pressing for the 21
On the receiver:
• If the green "OK" LED is flashing, the receiver is not configured.
Press and release
The green "OK" LED comes on steady. The receiver is configured.
• If the green "OK" LED is on steady, the receiver is already configured.
Press until the green "OK" LED flashes slowly (required pressing time varies
according to the receiver used), release the button.
Next, press and release
been reconfigured.
Control type
Heating
receiver
(OPTION)
Control system
PLC receiver
DHW PLC receiver
Typhone PLC
.
. The green "OK" LED comes on steady; the receiver has
Load-shedding
channel
0
No load shedding
1
2
3
4
5
6
7
8
0
No load shedding
1
2
3
4
5
6
7
8
st time
OK OK OK
OK
LED LED
Off
1 flashes
2 flashes
3 flashes
1 flashes 4 flashes
5 flashes
6 flashes
7 flashes
8 flashes
Off
1 flashes
2 flashes
3 flashes
2 flashes 4 flashes
5 flashes
6 flashes
7 flashes
8 flashes
3 flashes Off
Flashing Flashing
LED
Off
Flashing