Scsi Id Setting - Sony TSL-S11000 Guía Del Usario

SCSI ID Setting

14
Chapter 2 Preparation
The SCSI ID is set by the rotary switch on the rear panel. Press the + or -
buttons to move the number up or down, respectively.
As shipped from the factory, the SCSI ID is set to 0. Press the switch buttons,
if necessary, to select the SCSI ID number you require.
Precautions:
• The SCSI ID must be different from IDs of the other peripherals on the
SCSI bus.
• As shipped from the factory, SCSI parity is enabled and Term power is ON.
• Before changing the SCSI ID setting, be sure to turn off the power with the
POWER switch on the front panel.