5
Installation
Step
Flush The Filter
Turn the filter selector to the filtered water setting. Turn on the cold water tap
for 5 minutes to flush the filter cartridge. Do not drink or use the filtered water
during the flush cycle. The flush will remove any carbon dust and prepare the
filter for use.
This flush will remove any carbon particles and activate the filter for use. It is
normal to see some black carbon particles rinsed from the filter during the initial
flush. The flush does not affect the cartridge life. The cartridge included with this
system is good for up to 100 gallons of water. Please refer to the Replacement
Cartridge section for expected life of your filter and contaminant reductions.
Water Temp < 100F/38C
Do Not Filter Hot Water
7
WF-FM100