Getting Started; Charging The Battery; Microsd Card - T'nB CAMERA SPORT S10 Modo De Empleo

EN

GETTING STARTED

Welcome to the user manual of your new S10 camera!

— CHARGING THE BATTERY

For best use of your camera, charge it fully before first use.
1. Open the tab on the left side of the camera to access the micro USB port.
2. Connect the camera to a computer or other USB charging adapter using the
micro USB cable provided. A red indicator light comes on during charging and
turns off when it is complete.
The battery charges fully in approximately 3 hours.
Note: You can also charge your camera using a USB compatible T'nB wall
charger or car charger (sold separately).

— MICROSD CARD

A microSD card (sold separately) is required to capture videos and photos. Use
branded memory cards that meet the following specifications:
- microSD, microSDHC or micro SDXC
- Class 10 or UHS-I
- Minimum capacity 8 GB, maximum 16 GB
Note: Handle memory cards with care. As a precaution, turn off the camera
before inserting or removing the card. Consult the memory card manufacturer's
instructions for more information.
Inserting the microSD card
Open the tab on the left side of the camera (use your fingernail to open the
tab). You will find the microSD card slot here.
Insert a microSD card into the card slot with the label facing you.
Note: to remove the card, press it down with your fingernail to eject it from
the slot.
Formatting the microSD card
For best performance, always format the microSD card before first use. To keep
the card in good condition, format it regularly.
Note: formatting erases all the content on the card, so be sure to transfer your
photos and videos beforehand.
To format the card, press the «Down» button (located on the right edge of the
16
ICE_SPCAMS10.indd 16
cam
the
— P
To
Ho
cam
To
Ho
scr
— M
The
The
03/09/2018 11