Belkin F5U126ea Serie Manual Del Usaurio página 27

Boot Up Function
Error Messages:
Notes:
• After you finish the program, you will see different disk property when
you select different disk type. For example, if you select it as "USB
HDD", you will see the hard disk icon in the file manager window. If you
select it as "USB ZIP", you will see the removable disk icon in the file
manager window. However, only Windows 2000 and above can identify
the difference. In Windows 98, you just can see the "Removable Disk".
• After you finish the program, the device contains the files necessary for
boot up function. Please don't remove any files in this area. Otherwise it
will cause failure when you do the boot-up procedure of your computer.
• When you want to use the Belkin USB Flash Drive to boot up
your computer, please select the appropriate setting of the
BIOS. Please refer to the user manual of the motherboard.
• Since the BIOS design of each motherboard is quite different, we
cannot guarantee the boot up device is suitable for every computer.
• Since Award changed their BIOS spec. In March 2002, the boot
up procedure is different from before. We cannot identify if the
BIOS is new or old. So, this boot up utility is not suitable for
Award's new BIOS if you use USB ZIP boot up option.
When this message shows up, the possible
reason is your Windows OS installation is not
completed. (Please
make sure the path \WINDOWS\COMMAND\
EBD in Windows 98,
\WINDOWS\COMMAND\EBD in Windows ME,
or \XP_Bootable in Windows XP is exists)
When this message shows up,
please make sure the "Write-Protect"
switch is in "OFF" position.
When this message shows up,
please make sure the capacity of
the "Public Area" is enough.
26
1
2
3
4
5
6
7
8
9
10
11