Hamilton Beach 04160 Manual Del Usario página 6

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

840129900 ENv02.qxd
Installing the Carbon Pre-Filter
1
2
3
4
6
11/1/04
11:01 AM
Page 6
NOTE: The carbon pre-filter should be
replaced approximately every three
months.
Remove the intake grille by carefully
pulling the upper two side tabs away
from the body of the air purifier and
lifting up.
Locate the black carbon pre-filter.
It will be folded inside a plastic bag.
Remove and discard the plastic bag.
Unfold and flatten out the black
carbon pre-filter. Attach the four
corners of the carbon pre-filter
to the four hook fasteners on the
HEPA filter.
Insert the two tabs on the bottom of
the intake grille into the holes on the
bottom ledge of the air purifier.
Pivot the intake grille into place and
lightly press on the upper corners of
the grille to snap it into place.
NOTE: The air purifier has a safety
switch that prevents operation if the
intake grille is not properly installed.
DO NOT attempt to override or
disable this safety switch.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

041610416204163

Tabla de contenido