Product Overview; Product Features - GOO Air Disk Guia De Inicio Rapido

EN

PRODUCT OVERVIEW

1.Micro USB port (Connect with PC or charge)
2. Button (Press and hold for 3 seconds to power on, press
and hold for 47 seconds to restore factory settings)
3. Indicator light
4.Micro USB data cable

PRODUCT FEATURES

• Stylish in design, small in size and easy to carry.
• Wi-Fi wireless storage allows for easier le sharing.
• Support simultaneous Wi-Fi connection with multiple devices
(iPhone, iPad, Android devices).
• Connect via Wi-Fi. No internet routers needed.
Note: Restoring factory settings will remove your Wi-Fi password,
but not the data stored on the ash drive.
HOW TO USE THE PRODUCT
Turn on the device (Press and hold the button for 3 seconds)
phone settings Enable Wi-Fi
Enter connection password (No password by default. You can set the
password on GOO App) Upon successful Wi-Fi connection, the
indicator light will blink several times
ready to go.
HOW TO USE THE DEVICE WITH PC
Connect the device to PC using the data cable, and the device will serve
as a regular ash drive. (When connected to PC, the device cannot be
accessed by phone via Wi-Fi.)
HOW TO CHARGE THE DEVICE
When the device needs charging, use the data cable to connect it with a
charger, PC, power bank or other charging devices. It takes about 1.5
hours for a full charge. When fully charged, it allows about 3 hours of
continuous use.
Note: When the battery gets too low, the system will automatically turn
o and you will be unable to turn it back on until the device is put on
charge; if you do not intend to use the device for an extended period,
please charge it once every 1-2 months to maintain battery performance.
Open
Search Wi-Fi "GOO-Air Disk_xxx"
Open GOO App and you're