STEP 4:
Attach P6 Puck Catchers on the inside of end apron using pre-drilled pilot holes with H5 Screws as shown in
FIGURE 4. Tighten, but do not strip out H5 screws.
Thread P7 Leg Levelers into the Leg assembly as shown in FIGURE 4.
P7
FIGURE 4
Under the table, remove screw using a small phillips screwdriver and open the battery box. Insert 4(four)
AA batteries (not included) in the order of polarity as shown on the inside cover. Then close using a small
phillips screwdriver.
(If the game will not be used for a long period of the time, we recommend that the batteries be removed)
All Rights Reserved.
© 2012 Escalade Sports
4 pcs - H5 Phillips Round Head Screw
2 pcs - P6 Puck Catcher
4 pcs - P7 Leg Leveler
THIS STEP REQUIRES FOUR OR MORE ADULTS.
VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON
ITS LEGS. BE CAREFUL. THE TABLE IS VERY HEAVY.
DO NOT LIFT OR TURN THE TABLE OVER USING THE
CORNERS AS THIS MAY DAMAGE THEM.
PARTS REQUIRED:
P7
H5
7
P7
For Customer Service Call 1-888-996-2729
P7
P6