Better Homes and Gardens Bryant Nightstand Manual De Instrucciones página 7

5. Now, go back and securely tighten a ll the bolts. Make sure all the parts are tight and there are no gaps
between the parts. This will help keep the unit square.
6. Flip the assembled unit around at its front edge. Lay the Back Panel (E) to the back of the assembled
unit. Make sure the margins along all edges of the Back Panel are equal. Screw the 15 mm Washer
Head Screws (4) into the pre-drilled small holes on the Back Panel (E).
NOTE: We recommend attaching back panel with the screws at the corners first.
Assembly Instructions
A
E
C
4
M3.5 x 15 mm Washer Head
(12 used in this step)
D
7
Screw
④
B