With the alarm time set, press [3/6] to select whether the alarm should start the
sound.
Press [7] again to confirm and proceed to set alarm 2.
Repeat all the steps above exactly as when setting alarm 1.
Press [7] again to confirm the settings for alarm 2.
Disable alarm function:
Press and hold [7] for 3 seconds, then press [7] once more.
The display will flash "Alarm 1" or "Alarm 2". Press [3/ 6] to turn off
confirm.
Output format as below:
Output
LCD display
Beep sound
Display shows bell symbol
Radio output
Display shows radio symbol
Disabled
All the bell
If no key is pressed for 15 seconds, the system will go back to normal mode
6.
Use the snooze function
When the alarm is ringing, press [9] "SNOOZE/Dimmer"
stop, but ring again every 9 minutes. Press [1] to completely turn off the alarm.
7.
Listen to FM radio
For radio mode, press [1]. The display will show FM and the current frequency in digits, e.g. FM92.6
MHz.
, radio
and alarm symbols are gone
or
.
.
The display will flash "SNOOZE". The alarm will
radio or
a beep
and press [7] again to
3