Salli SIT HAPPY Manual De Instrucciones página 2

IMPORTANT!
DISCLAIMER
The user shall determine the suitability of the Salli
shall assume all risk and liability in connection therewith; this will include all items manufactured or distributed by Salli
Systems / Easydoing Oy ("Salli"). Salli cannot accept responsibility for injury and/or damage that occurs in connection
with the testing, trial use or regular use of the product except as provided for in mandatory law. Great care should be
taken when using the products and/or accessories related to product.
Before using the product the user is required to read the whole instruction manual and to follow the instructions.
Don't use the product...
1. if you get any pelvic, extremity, back, or other kinds of pain from using the chair other than normal muscle
soreness which comes from adaptation. You might also be using the chair in the wrong way.
2. if your sense of balance or muscle control is abnormal or impaired for any reason.
3. if you use medication or drugs that interfere with your sense of balance or muscle control.
4. if you do not or cannot adjust your worktop to a functional height that is compatible with the optimal height of the
Salli Saddle chair. The definition of the optimal height of the table / work is described in the following instructions.
5. if you weigh over 100 kg.
Due to the danger of falling down do not use yourself or allow children or anyone else to use a product unless the feet of the user
reach the floor firmly when sitting down*. Playing with the chair is prohibited. For shorter users we recommend changing the gas
spring to a shorter model to ensure the safe use of the product. Gas springs are available from Salli and authorized dealers.
*Using Foot Support is an exception to this rule. Foot Support is recommended for temporary use e.g. when working with high workstations.
ASSEMBLING THE CHAIR
1
Place the base on the
floor, with the castors
against the floor. Slip
the wider end of the
gas spring into the hole
in the base.
Attention!
temperature for 24 hours before first use!
CHAIR ADJUSTMENTS
Salli Light Basic
Salli Slim Basic
Fixed width
All chairs have gas spring height adjustment.
2
READ THESE INSTRUCTIONS BEFORE USING THE PRODUCT!
®
Let the chair warm up in room
Salli Light Tilt Salli Light Swing
Salli Slim Tilt Salli Slim Swing
Inclination Swing mechanism
Saddle Chair and its accessories for his or her intended use and
2
Insert the seat into the
narrow end of the gas spring.
Adjust the spring a few times
to its extreme positions by
lifting the height adjustment
lever up*. This will guarantee
the best working condition of
the spring.
*A more detailed guide on using the height
adjustment can be found on page 3.
2
1. Swing mechanism 3.
2. Height adjustment
2
2
Inclination adjustment
1
3