Platinum Luxury-Lift ® Assembly Instructions - La-Z-Boy Platinum Luxury-Lift Instrucciones De Operación

Platinum Luxury-Lift
NOTICE
– To reduce the risk of product damage:
• Do not plug the power supply in until instructed.
1. Choose a location for the lift chair that is close to an electrical outlet.
2. Starting with the chair removed from the carton and all packing material removed, carefully turn
the chair forward to rest on the front of the arms and top of the back.
3. The power supply connector is tucked behind the upholstered tailgate (F
power supply connector from the tailgate by gently pulling it out.
4. Locate and cut the cable tie holding the boxed power supply and power cord to the underside
of the chair (F 1). Set the box and power cord aside.
IGURE
5. Carefully return the chair to its upright position.
6. The hand wand is tucked between the back and seat for shipping (F
hand wand out from between the back and seat, remove the plastic bag and lay hand wand
on seat (F 3).
IGURE
7. Make the power supply connections.
Remove power supply from box and unwind cord.
•
• Align the power supply connector to the power supply connector from behind the chair
and push the connectors together until they lock (F
Connect the 120 volt power cord to the power transformer. Align the 120 volt power cord connector
•
to the power transformer and push together until fully seated (F
instructed in the Operating Instructions.
8. Proceed to the Battery Backup Assembly Instructions.
(Assembly Instructions Continued)
6
Assembly Instructions
®
1). Remove the
IGURE
2). Gently pull the
IGURE
4).
IGURE
4). Do not plug in until
IGURE
Platinum Luxury-Lift
®
F 1
IGURE
Tie Securing Power Supply and Power Cord
F 2
IGURE
Hand Wand
F 4
IGURE
Assembly Instructions
Upholstered Tailgate
Power Supply Connector
Tucked Behind Tailgate
F 3
IGURE
Power Supply
Connection
120 Volt Power
Cord Connection
7