Precautions And Warnings; Installation Instructions - GameFactor PSG650 Manual

PRECAUTIONS AND WARNINGS

• Before running the power cord, make sure the
power switch is in the off (O) position and the
corresponding voltage switch with the voltage
used in your country (110V for Mexico).
• Connecting the power source to a higher voltage
than specified can cause irreparable damage to
the supply and your computer.
• Never put objects into the holes or fan of the
power supply.
• Do not open the power supply cover. Its
components generate high voltages. The power
supply should only be opened by qualified
personnel.
• When handling the power supply, it should
ALWAYS be turned off by from the switch and
disconnected from the electrical power line.
• Avoid spilling liquids on your device, they may
cause it to malfunction.
• Using this device under conditions other than
normal may cause electric shock..

INSTALLATION INSTRUCTIONS

1. Remove the cover from
the cabinet, the method of
removing the cover may
vary depending on the
model. Consult the manual
for this operation.
2. Place the power source in
the space designated for it
in the case. Make sure the
screw holes on your power
source match the holes on
the case. The location of the
bay for the power source
may vary according to the
case design.