Operation; Preparation; Blending - Beco TBP 7354 X Manual Del Usario

3

Operation

3.1 Preparation

WARNING: Switch
A
appliance and disconnect from
supply before changing accessories
or approaching parts that move in
use.
1. Remove all packaging and stickers materials
and dispose of them according to the applicable
legal regulations.
2. Take the entire unit of the motor housing
(3) and place it on a level surface, e.g. on the
kitchen counter.
WARNING: The blade (2) unit is
A
very sharp! Handle the blade unit
with utmost care, especially during
cleaning, in order to avoid injuries.
3. Clean all parts, with the exception of the motor
housing (3) as described in "Cleaning and Care".
4. Then re-assemble the jug blender in the reverse
order.
5. Insert the chopping blade (2) unit onto the
jug (1) by rotating it clockwise. You can see
the "lock" arrow direction at the bottom of the
chopping blade (2) unit.
6. Place the jug (1) onto the motor housing (3).
Lock the jug clockwise according to the "lock"
arrow on the motor housing (3).
10 / 84 EN
7. To release the jug (1), turn it to anti-clockwise
direction.
off the
C
8. Before using the appliance cut the food into
small pieces.

3.2 Blending

1. Place the device on an even and dry surface.
The non-slip feet (6) ensure the stability of the
appliance.
2. Make sure that the power cord is disconnected
from the power supply.
3. Remove the jug (1) from the motor housing
(3); to do this, turn the jug in an anti-clockwise
direction and lift it upwards; Turn of the
chopping blade (2) and turn clockwise.
4. Now put the ingredients to be blended in the
jug (1). The ingredients should only be about
2-5 cm long.
C
Compact Smoothie Maker / User Manual
Lock
Make sure that the notches on the
bottom of the jug (1) fit those in the
motor housing (3).
Add water to ensure the jug blender
functions smoothly.
Unlock