Product Maintenance - Heider AGX Super Power Manual Del Usuario

I
4 HEIDER AGX SUPER POWER
CHARGER INSTRUCTIONS
REPLACING THE SWITCH
First, you should take the cap off. You will see inside a round black part around the
spring with two tiny holes on it. Unscrew it by using a pointed tool. That's how you will
set the switch free and replace it.

PRODUCT MAINTENANCE

Clean your flashlight and the lens regularly with a clean cloth.
!WARNING
The LED of the flashlight warms up if it works for a long period of time. Do not let
it touch to your body.
Since the lighting power of the flashlight is considerably high, shining it directly
in to your own or others eyes may cause transient visual loss or harm the eyes.
Place the battery in the charger as indicated on the sticker. If the battery is not
placed in the right way, the charger and/or the battery may get damaged.
Place the battery as shown on the sticker by paying
attention to the (+) / (-) poles. The charger will
automatically regulate the current and voltage of
the battery. When charging, the signal light on the
charger will be red and when the charging is over,
it will become green. The average charging time is
100 minutes.
ENGLISH