Connect The Two Wires From Your Marauder; On The Ps4™ Menu Go To "Settings" And Select > "Sound And Screen" > "Audio Output Settings" > "Primary Output Port" > "Digital Out (Optical)". Ensure Only "Aac" Is Ticked And Not "Dolby Digital; Or "Dts" And Press "Ok" To Confirm; On The "Audio Output Settings" Menu Select "Audio Format (Priority)" And Ensure "Linear Pcm - VENOM Marauder 7.1 Surround Gaming Guia Del Usuario

You will also need to change the PS4 system settings
to Optical:
1. On the PS4™ menu go to "Settings" and select >
"Sound and Screen" > "Audio Output Settings"
> "Primary Output Port" > "Digital Out (Optical)".
Ensure only "AAC" is ticked and not "Dolby Digital"

or "DTS" and press "OK" to confirm.

2. On the "Audio Output Settings" menu select
"Audio Format (Priority)" and ensure "Linear PCM"
is ticked.
3. Go back to "Settings" and select > "Devices"
>"Audio Devices" > "Output to Headphones" and
select "All Audio".
4. On your inline remote, both the chat and game
volume are operated by the chat volume +/-.
Setting up your Xbox 360® via Optical connection:

1. Connect the two wires from your Marauder 7.1

Surround Gaming Headset into your USB Audio
Hub. The Audio plug slots into the port with the
headset image, and the Micro USB plugs into the
port with the USB image.
2. Connect the Optical Cable into your USB Audio
Hub via the Optical Port, and the other end into the
Optical Port on the back of your Xbox 360 system.
3. Connect the USB cable from your USB Audio Hub
into a spare USB port on your Xbox 360 system.
4. Power up your Xbox 360 system and the light on
the USB Audio Hub will turn red.
5. For chat, connect the Audio cable (provided) to
the USB Audio Hub via the port with the gaming
controller image. In the other end connect the
2.5mm to 3.5mm Audio Cable (provided), and from
there into your Xbox 360 controller.
You will also need to change your Xbox 360®
settings to optical:
1. On the Xbox 360 menu go to "Settings" >
"System" > "Console Settings" > "Audio" and
select "Digital Output".
Setting up your Xbox One® via Optical connection:
1. Connect the two wires from your Marauder 7.1
Surround Gaming Headset into your USB Audio
Hub. The Audio plug slots into the port with the
headset image, and the Micro USB plugs into the
port with the USB image.
2. Connect the Optical Cable into your USB Audio
Hub via the Optical Port, and the other end into the
Optical Port on the back of your Xbox One system.
3. Connect the USB cable from your USB Audio Hub
into a spare USB port on your Xbox One system.
4. Power up your Xbox One system and the light on
the USB Audio Hub will turn red.
5. For chat, first connect an Official Surround Headset
Adaptor (sold separately), if using an original
controller.
6. Connect the Audio cable (provided) to the USB
Audio Hub via the port with the gaming controller
image. Plug the other end into your Official
Surround Headset Adaptor.
For chat function using a new Xbox One controller,
which has a direct audio input:
7. Connect the Audio Cable (provided) to the USB
Audio Hub via the port with a gaming controller
image. Plug the other end directly into your Xbox
One Controller.
Setting up with your PC:
1. Connect the two wires from your Marauder 7.1
Surround Gaming Headset into your USB Audio
Hub. The Audio plug slots into the port with the
headset image, and the Micro USB plugs into the
port with the USB image.
2. Connect the USB Cable from your USB Audio Hub
into a spare USB port on your PC.
3. Power up your PC and the light on the USB Audio
Hub will turn red.
In Line Remote
VIBRATION
GAME
1. Mute on/off
2. Game Volume up/down
3. Chat Volume up/down
4. Vibration up/down
CHAT