TO EXTENd THE EXTENSION ROLLERS
1.
Turn the horizontal extension lock knob (A) Fig. 18 counter-clockwise.
2.
Move the extension roller (B) Fig. 18 out or in, depending on the length of the workpiece.
3.
Tighten the horizontal extension lock knob.
TO RAISE ANd LOWER THE EXTENSION ROLLERS
1.
Turn the vertical extension lock knob (A) Fig. 17 counter-clockwise.
2.
Raise or lower the extension roller (B) to match the height of the saw table.
3.
Tighten the vertical extension lock knob.
B
A
For assistance with your machine, visit our website at www.deltaportercable.com for a list of service centers or call the
DELTA Machinery help line at 1-800-223-7278 (In Canada call 1-800-463-3582).
REPLACEMENT PARTS
Use only identical replacement parts. For a parts list or to order parts, visit our website at servicenet.deltamachinery.com. You
can also order parts from your nearest factory-owned branch, or by calling our Customer Care Center at 1-800-223-7278 to
receive personalized support from highly-trained technicians.
FREE WARNING LABEL REPLACEMENT
If your warning labels become illegible or are missing, call 1-800-223-7278 for a free replacement.
CAUTION
KEEP BOTH HANDS ON HANDLE WHILE
RAISING AND LOWERING STAND. STAND
HAS GAS ASSIST LIFTING AND MAY
RAISE UNEXPECTEDLY WHEN LEVER
IS RELEASED.
SERVICE ANd REPAIRS
All quality tools will eventually require servicing and/or replacement of parts. For information about Delta Machinery, its factory-
owned branches, or an Authorized Warranty Service Center, visit our website at www.deltaportercable.com or call our Customer
Care Center at 1-800-223-7278. All repairs made by our service centers are fully guaranteed against defective material and
workmanship. We cannot guarantee repairs made or attempted by others.
You can also write to us for information at Delta Machinery, 4825 Highway 45 North, Jackson, Tennessee 38305 - Attention:
Product Service. Be sure to include all of the information shown on the nameplate of your tool (model number, type, serial
number, etc.)
Fig. 17
TROUBLESHOOTING
SERVICE
ATENCIÓN
MANTENGA AMBAS MANOS EN EL MANGO AL
ELEVAR Y BAJAR LA BASE. LA BASE TIENE UN
SISTEMA DE ELEVACIÓN ASISTIDA POR GAS Y
PUEDE ELEVARSE EN FORMA INESPERADA AL
SOLTAR LA PALANCA.
7
Fig. 18
ATTENTION
GARDER LES DEUX MAINS SUR LA POIGNÉE AU
MOMENT DE RELEVER OU D'ABAISSER LE SOCLE.
LE SOCLE EST DOTÉ D'UN DISPOSITIF DE LEVAGE
AU GAZ QUI PEUT SE RELEVER SOUDAINEMENT
LORSQUE LE LEVIER EST RELÂCHÉ.
B
A
656160-00