Abicor Binzel WK23 Instructivo De Servicio página 31

Coolant recirculator
6 Installation
6.1 Installation
1
6
5
1 Heat exchanger
(finned radiator), 4-row
2 Coolant supply (blue)
Fig. 5 Circuit diagram WK43 with flow control option
NOTICE
• We recommend to install a flow control in the coolant return to
permanently monitor the correct functioning of the entire cooling system.
 Fig. 4 Circuit diagram WK23 with flow control option on page EN-10
and Fig. 5 Circuit diagram WK43 with flow control option on
page EN-11
• In case of insufficient flow, the flow control causes the immediate switch-
off of the connected devices and prevents thermal overload.
CAUTION
Risk of toppling
Physical damage or damage to components due to improper mounting.
• Separate the supply lines.
• Place the components on a suitable base (flat, tight, dry) that prevents
them from tipping.
2 3
4
3 Coolant return (red)
4 Tank
6 Installation
5 Motor with fan
6 Submergible pump
EN - 11