Extending The Hitch; Using The Parking Brake Strap; Using The Seat Harness System - Bell SMOOTH SAILER Manual De Instrucciones

The tires on the trailer wheels have traditional Schrader pump valves.
We recommend inflating them with a manual pump to the recommended pressure
printed on the side of the tires. Do not exceed the maximum recommended pressure.
For easy towing and safe handling, check tires often for proper inflation and wear.

EXTENDING THE HITCH

Tip the trailer back on its frame so the underside
is fully visible. Remove the grenade pin and rotate
the hitch arm upward until fully extended. Reinsert
the grenade pin and lock the spring clip. Figure
For folding and storage, reverse the process and
be sure to insert the pin fully and lock it with the
spring clip.

USING THE PARKING BRAKE STRAP

The trailer is equipped with a strap parking brake
that is quick and easy to use while loading or when
the trailer is fully assembled and stored.
To use the strap, unclip it from the D-Ring and wrap
around the wheel at its closest point – hooking it
securely back onto the D-Ring. Figure
USING THE SAFETY HARNESS SYSTEM
There are two sets of shoulder harnesses positioned
side by side on the seat back. The two sets of
shoulder harnesses are comprised of four separate
shoulder straps (straps A, B, C and D) and three
separate crotch straps (straps 1, 2 and 3). Figure
For two children passengers, use shoulder straps
A and B with crotch strap 1 and shoulder straps C
and D with crotch strap 2. This will position the two
children side by side. When carrying only one child
passenger, the child may sit in the center using
straps B, C and 3.
8
.
3A
3A
4A
.
4A
.
5A
5A
E
A B C D
1
2
3