Important Safety Information - Bigass BAS-HPF1-12 Guia De Instalacion

IMPORTANT SAFETY INFORMATION

This guide contains important instructions and safety information.
Leave with owner after installation.
CAUTION: Risk of electric shock. Disconnect power before
servicing.
Suitable for damp locations.
Not for use in dwellings.
The Big Ass Light product warranty will not cover equipment
damage or failure caused by improper installation.
Connection of Big Ass Light products to the mains must be
performed by qualified persons in accordance with all applicable
codes. Code compliance is your responsibility. Failure to comply
with these codes could result in personal injury or property
damage.
This product contains high intensity LED devices. The fixture
should be positioned so that prolonged staring into the luminaire
at a distance closer than 6 ft (1.8 m) is not expected.
Terminal block not included. Qualified persons shall use approved
screwless type single terminal device rated minimum 400 VAC
and 5 A with rated connecting capacity of 1.5 mm
the fixing methodology is to be according to approved wiring
methodologies.
The fixture shall only be used complete with its lens.
The light source contained in this fixture shall only be replaced by
the manufacturer or his service agent or a similar qualified person.
Ensure power is routed to an approved outlet box at the ceiling
before beginning installation. Support the fixture so that it does
not fall during installation.
HIGH POWERED FIXTURE
ATTENTION
© 2016 BIG ASS LIGHT, LLC ALL RIGHTS RESERVED
. Selection of
2
WWW.BIGASSLIGHT.COM
1